UniLink Standard
Link style fixed mount
head solutions hardware
The Combo head solutions pad mounted on the UniLink Flip Down hardware.
UniLink is an unified system. One System Fits All
UniLink™
UniLink began as an improvement to the current TWB family of products. The goal is to simplify the line and use one link for everything. During this project the past issues of TWB are being addressed.
One of the main focus of the UniLink system is simplicity, and this is accomplished with the following points:
- Most adjustments can be accomplished with one tool, a 4mm hex wrench
- All systems use the same link option with three (3) link size options: 1 1/2in (3.81cm), 2in (5.08cm) and 3in (7.62cm)
- All elements are compatible with one another.
UniLink Flip Down Mount
Link style flip down mount
head solutions hardware
Allows to remove head solution
out of the way
without losing any setup
UniLink Ultra Mount
Link style ultra mount
head solutions hardware
Allows to combine head pads
as occipital and suboccipital
support independently.
Requires two components:
Head Solutions Back Mount for UniLink
SBM300 half inch square stave mount
SBM300 series for square stave mount
SBM-DT half inch square stave mount
SBM-DT series for 1/2in (12.70mm)
square stave mount
Provides an additional 2 3/8in (6.03cm)
of horizontal adjustment
Ottobock Head Solution Hardware
Proven quality hardware from a leader in the rehabilitation market, Ottobock. 1in (2.54cm) ball configuration, metric. Includes back mount.
Hardware can be adapted to mount 17mm (5/8in) ball headpads with the 17mm adapter ring. Check the Adapters section.
Straight Ottobock Hardware
Straight Head Support Mounting Hardware
1in (2.54cm) ball configuration
Curved Ottobock Hardware
Curved Head Support Mounting Hardware
1in (2.54cm) ball configuration
17mm Ball Adapter Ottobock Hardware
Adapter ring for 17mm (5/8in) ball headpads
Heavy Duty Clamp Ottobock Hardware
Only compatible with Ottobock hardware. Mounts only on back (seating) shell.
The Combo head solutions pad mounted on the UniLink Flip Down hardware.
Head Mounting Options
Basic affordable mounting
HMO Mounts
The HMO Series is designed for simplicity and affordability. It comes in both 1in (2.54cm) or 17mm (5/8in) ball configurations.
The series main features are:
- Simple, straight forward, robust, and economical support pad mounting.
- Easily achieved anterior, posterior, height, and rotational movements.
- The multi-axis supplies an extra rotational point on the vertical mounting rod.
- Both styles of mounting hardware come in 1in (2.54cm) or 17mm (5/8in) versions to accommodate all mounting styles of our imperial head support and positioning pads.
- 17mm ball configuration is also available to fit metric pads
HMO400 basic mounting
The 400 series is the most basic and affordable option Stealth Products offers. It has 3 points of adjustment:
- height adjustment point
- depth adjustment point
- pad angle adjustment point
HMO475 Series
The 475 series is a basic multi-axis hardware system with 4 points of adjustment
Has a vertical angle of 20° and a horizontal 360° radius of adjustment on the triangle
The head pad ball mount allows for a 60° angle of adjustment from any direction with a 360° vertical angle
HMO500 Series
The 500 series is an affordable metric full multi-axis hardware system that's lightweight and strong
7 points of adjustment
Easy to setup
Height Adjustable, Angle, Tilt and Swivel
Economical support pad mounting
The HMO non metric hardware options do not include pad mount ring. The ring is included with non metric head pad options. All metric versions include SURING-SD split ring.
The HMO500 series does not need ring, it comes with an universal pad mounting plate that supports 1in (2.54cm) and 17mm ball configurations.
Hardware Protection
Hardware Protection
Tone Deflector
If the client is exerting strong forces against the head support, our Tone Deflector can be added to absorb and diffuse these forces, preventing loss of adjustment and breakage.
Standard Tone Deflector
Tone deflector for
17mm (5/8in) ball headpads
1in Ball Tone Deflector
Tone deflector for
1in (2.54cm) ball headpads
Stealth Back Mounts
SBM300 half inch square stave mount
SBM300 series for square stave mount
Flip Down back mount for half inch square stave hardware
Provides flip down for mounting hardware with 1/2in (12.70mm) square staves
Track system for SBM mounts
Track set that allows horizontal adjustment for any Stealth or Ottobock back mount
Track Dimensions:
6in (15.24cm) x 2in (5.08cm)
(Width x Height)
Hardware Adapters
Universal adapter plate
Adapter ring that allows 1in (2.54cm) ball hardware to support 17mm (5/8in) ball headpads
Universal adapter plate
Adapter plates provide a larger range of accommodation for various backrests
Adapter clamp that allows head solution mounting head support to crossbar
Adapter clamp allows head solution mounting to be fastened onto a
Cane Mount Adapters
Cane Mount Adapters
Push Handle Hardware Mount
The HMA001 is used with a back and/or seating system which:
- Do not offer a location for head support hardware
- Do not offer the rigidity for head support hardware
- Do not offer a location in the appropriate position for the end user's needs
Solid Mounting head mount adapter
Solid mounting surface compatible with Stealth SBM Accessories or any hardware with a 1 7/8in (4.76cm) Ottobock's hole pattern
Standalone head mount adapter
The head mount is attached
independent from the wheelchair's
seating system
Width Adjustable head mount adapter
Compatible with wheelchairs 14in (35.56cm) to 18in (45.72cm) wide and handles from 5/8in (15.08mm) to 1in (2.54cm) in diameter
Removable head mount adapter
Detent Pins allow removal without the need of tools or special hardware
Cane Mount Adapters
Ottobock Push Handle Mount
The Ottobock Push Handle Mount or Clinical Assembly Set easily attaches to the horizontal push handles of a wheelchair with a seat width of 38cm (15in) to 62cm (24 3/8in). It is compatible with most headrest mounting hardware. The Clinical Assembly Set fits most wheelchair push handles and its easy installation or removal make it ideal for assessment purposes.
Small head mount adapter
Ottobock Clinical Assembly Set for 38cm (15in) to 42cm (16 1/2in) wide frames
Medium head mount adapter
Ottobock Clinical Assembly Set for 40cm (15 3/4in) to 54cm (21 1/4in) wide frames
Large head mount adapter
Ottobock Clinical Assembly Set for 52cm (20 1/2in) to 62cm (24 3/8in) wide frames
Cane Mount Adapters
Ottobock Back Cane Crossbar Mount
The Back Cane Crossbar Mount or Assembly Set from Ottobock is a headrest adapter kit which can be added to the vertical cane poles of most wheelchairs. Thanks to the simple mounting system, the Assembly Set is removable, making it ideal for folding chairs. It is compatible with most headrest mounting hardware.
Fits wheelchair 18cm (7 1/8in) to 62cm (24 3/8in) back frame wide.
Small head mount adapter
Ottobock Assembly Set for 18cm (7 1/8in) to 42cm (16 1/2in) wide frames
Medium head mount adapter
Ottobock Assembly Set for 40cm (15 3/4in) to 54cm (21 1/4in) wide frames
Large head mount adapter
Ottobock Assembly Set for 52cm (20 1/2in) to 62cm (24 3/8in) wide frames
for more information
1.800.965.9229